How to Quote a Bespoke Diamond Ring from a Loose Diamond Offer
To quote a bespoke diamond ring accurately, start with the confirmed loose-diamond cost, add the manufacturing and fulfilment costs, account for project risks, apply the required profit margin and calculate VAT according to the transaction.
A loose diamond offer is not a finished engagement-ring quotation.
For example, a jeweller may receive a quotation of €2,100 for a natural round brilliant diamond.
The client then requests an 18K yellow-gold solitaire engagement ring.
The finished price must account for more than the centre diamond.
The project may require precious metal, CAD design, casting, a suitable diamond head, stone-setting labour, finishing, inspection and secure delivery.
The jeweller must also protect the business against changing supplier prices, expired diamond reservations, design revisions and unexpected manufacturing work.
Finally, the customer-facing price must provide sufficient margin after the project's actual costs.
A ring with a €2,100 centre diamond might therefore require a final selling price substantially above €2,100.
That difference does not automatically represent profit.
The correct quotation separates the loose-stone purchase, finished-ring production, commercial margin, tax treatment and responsibility for changes after approval.
This guide provides a complete trade workflow, including a worked European bespoke-ring quote, formulas for margin and markup, an itemised costing sheet and a change-control process for jewellers, jewellery designers and manufacturers.
What Should a Bespoke Diamond Ring Quote Include?
A complete bespoke-ring quotation should identify the diamond, describe the finished ring and show how the final customer price is calculated.
It should also state what is included, what is excluded and when the quoted price expires.
Main cost categories
Cost category | What it covers |
Centre diamond | Identified natural loose diamond |
Diamond procurement | Sourcing, handling and agreed supplier charges |
Inbound transport | Shipping and insurance to the jeweller |
Precious metal | Gold or platinum used in the mounting |
Design | Consultation, CAD or other approved design work |
Manufacturing | Casting, fabrication or workshop production |
Setting labour | Secure installation of the diamond |
Additional diamonds | Side stones, pavé or halo diamonds where required |
Finishing | Polishing, surface finishing and relevant treatments |
Quality control | Inspection of the finished ring |
Packaging and fulfilment | Approved presentation and delivery costs |
Risk allowance | Budget for foreseeable project uncertainty |
Profit contribution | Amount built into the selling price above planned project costs |
VAT | Applicable tax calculated under the correct rules |
Not every ring needs every cost category.
A simple solitaire may be less complicated than a custom halo design containing many small diamonds.
However, leaving a genuine project cost out of the quotation does not make that expense disappear.
It reduces the amount remaining to cover overheads and profit.
Why a Loose Diamond Price Is Not the Final Ring Price
Consider a natural diamond offered to a jeweller for €2,100.
This price may cover only the stone.
It does not necessarily include:
Shipping to the workshop.
Transport insurance.
Gold or platinum.
A manufactured ring head.
Ring sizing.
CAD design.
Casting and finishing.
Stone-setting labour.
Inspection.
Customer delivery.
Applicable taxes.
The supplier's offer may also have an expiry time or be subject to stock availability.
The jeweller should therefore treat it as one input into the project costing—not as a guaranteed permanent cost.
Example
Loose natural diamond offer: €2,100.
Estimated production and fulfilment costs: €1,150.
Estimated direct project cost: €3,250.
This leaves the jeweller still needing to consider project risk, margin and VAT.
A finished ring cannot be priced sustainably by adding a small arbitrary amount to the loose diamond alone.
Step 1: Verify the Actual Loose Diamond Offer
Before calculating the ring price, confirm precisely which diamond has been offered.
A quotation describing only a “1-carat G VS2 diamond” is not sufficient.
Two natural diamonds with similar headline specifications may have different dimensions, optical appearances and prices.
Stone-offer verification checklist
Detail | Required information |
Supplier | Identified business |
Stock reference | Exact reference |
Origin | Natural |
Shape | Round, oval or other |
Carat weight | Exact weight |
Measurements | Actual length, width and depth |
Colour | Graded value |
Clarity | Graded value |
Cut information | As applicable |
Fluorescence | Recorded |
Grading laboratory | GIA, IGI, HRD or agreed alternative |
Report number | Verifiable |
Offered price | Exact amount and currency |
VAT treatment | Confirmed on invoice |
Shipping | Included or additional |
Insurance | Included or additional |
Availability | Confirmed |
Reservation terms | Agreed |
Offer expiry | Stated |
Return and inspection terms | Written |
This information protects the jeweller against preparing a client quotation around an unidentified or unavailable stone.
What if the stone is only shortlisted?
The jeweller can prepare a provisional ring estimate.
However, the customer should be told that the centre diamond is not yet reserved.
The final diamond cost may change before an order is confirmed.
A provisional estimate should not be represented as a fixed-price, guaranteed-availability offer.
Step 2: Determine the Diamond's True Acquisition Cost
The quoted stone price and its accounting cost may differ.
For example, shipping, insurance or handling charges may be additional.
Foreign-currency transactions can also introduce conversion costs.
Illustrative stone landed cost
Component | Amount |
Loose natural diamond | €2,100 |
Inbound shipping and insurance | €50 |
Diamond landed cost | €2,150 |
These figures are hypothetical, not a Dalila quote.
The landed cost is the amount used in this example's project costing before manufacturing.
What about VAT paid on the diamond?
VAT should not automatically be treated as a permanent acquisition cost.
If the jeweller is entitled to recover input VAT, that recoverable amount is generally excluded from the net costing basis.
If VAT is non-recoverable, it may form part of the actual cost.
The correct treatment depends on the business, purchase and applicable tax rules.
The jeweller should not combine recoverable input VAT with manufacturing costs and then add output VAT again as though both amounts were ordinary operating expenses.
An accountant should verify the treatment where necessary.
Step 3: Calculate Gold or Platinum Cost
The metal cost should reflect the actual proposed ring, not a generic allowance based on appearance alone.
A wider band may require more metal than a delicate one.
A larger ring size may also affect metal requirements.
The head, shoulders and other components must be included.
Precious-metal costing inputs
Input | Explanation |
Metal type | 18K gold, platinum or another alloy |
Alloy | Yellow, white or rose gold composition as relevant |
Estimated finished weight | Design-based target |
Production material allowance | Additional metal required for chosen process |
Metal purchase or charge rate | Actual workshop basis |
Casting/fabrication charges | Separate where applicable |
Recoverable scrap or credit | Recognise under the workshop's accounting method |
Final metal cost | Net amount attributed to project |
A jeweller should avoid counting the same metal twice.
For example, if an external casting quote already includes alloy material, do not add a second full metal charge without confirming the invoice structure.
Illustrative example
A jeweller estimates a metal allocation of €350 for the proposed 18K yellow-gold ring.
That amount belongs in the cost model.
It should not be described as the current market cost of a particular metal weight without an actual metal-rate and production calculation.
Step 4: Calculate Design and CAD Charges
Not every bespoke ring requires a completely original design.
Some orders use an existing mounting pattern with minor adjustments.
Others require custom modelling, client revisions and manufacturing drawings.
The jeweller should classify the job before quoting.
Design categories
Design type | Typical costing consideration |
Standard solitaire adaptation | Limited design work |
Modified existing design | Adjustments and approval |
Fully bespoke ring | New CAD and technical development |
Complex halo or multi-stone ring | More extensive stone layout and setting planning |
Client-supplied inspiration | Interpretation and manufacturable design work |
Existing ring remodelling | Additional measurement and engineering |
A design fee should cover the actual work expected.
If the initial quotation includes two design revisions, that allowance should be documented.
Further revisions can then be treated as additional work under the agreed terms.
Example
CAD design and initial approval allowance: €100.
This is an illustrative internal cost, not a universal CAD fee.
A more complicated project may require substantially more design effort.
Step 5: Separate Manufacturing from Setting Labour
Manufacturing the metal ring and setting the diamond are not the same operation.
The ring must first be produced or prepared.
The stone must then be fitted securely.
Manufacturing may include
CAD preparation.
Casting or fabrication.
Head or basket construction.
Assembly.
Soldering or joining.
Ring sizing.
Initial surface preparation.
Diamond setting may include
Checking stone measurements.
Preparing the diamond seat.
Positioning the centre diamond.
Securing prongs or bezel metal.
Inspecting alignment.
Checking stone retention.
A jeweller may perform both activities internally.
Alternatively, separate workshops may provide different services.
The quote should distinguish the costs even when a single manufacturer invoices for the finished mounting.
Illustrative labour costs
Task | Cost |
Casting/fabrication | €200 |
Centre-diamond setting | €250 |
Finishing | €100 |
Quality-control inspection | €50 |
Total workshop costs | €600 |
These are hypothetical figures.
They demonstrate cost allocation, not prevailing European workshop rates.
Step 6: Include Packaging, Delivery and Other Direct Costs
Small project expenses can accumulate.
For example, a customer may expect a presentation box and insured delivery.
Those are real costs even when the jeweller chooses not to show them as separate invoice lines.
Possible direct costs
Item | Example treatment |
Presentation box | Included in project cost |
Finished-ring shipping | Included or separately charged |
Transit insurance | Included where applicable |
Independent final inspection | Included if commissioned |
Hallmarking | Added if required and not included |
Gemstone documentation | Included or separately charged |
Engraving | Included or optional |
Extra resizing | Only if expressly agreed |
The jeweller must know which items are included in the final customer quotation.
A promise of “free delivery” simply means that the selling price or business absorbs that cost.
Step 7: Calculate the Full Direct Cost
The following example represents a hypothetical bespoke natural diamond solitaire manufactured by a Belgian jeweller.
All prices are illustrative and exclude recoverable VAT.
Worked example: One-carat natural diamond solitaire
Cost component | Amount |
Natural centre diamond | €2,100 |
Inbound shipping and insurance | €50 |
18K gold allocation | €350 |
CAD and design | €100 |
Casting/fabrication | €200 |
Diamond-setting labour | €250 |
Finishing | €100 |
Quality control | €50 |
Packaging and fulfilment | €50 |
Total direct cost | €3,250 |
This €3,250 is not the selling price.
It is the project's estimated direct cost.
The jeweller still needs to decide how to provide for risk, overheads and profit.
Step 8: Add an Appropriate Change-Risk Allowance
A bespoke ring project can change between the initial enquiry and final delivery.
For example, the originally quoted diamond may be sold to another buyer before reservation.
The client may request a wider band after CAD approval.
A manufacturing issue may require additional work.
These events create cost exposure.
Common project risks
Risk | Possible financial impact |
Diamond price changes | Higher acquisition cost |
Diamond becomes unavailable | Replacement shortlist or delay |
Gold price changes | Higher metal cost |
Ring-size change | More metal or reworking |
Additional CAD revision | Additional design labour |
Changed diamond shape | New head or setting design |
Setting issue | Additional workshop work |
Delivery changes | Extra shipping or insurance |
Rush deadline | Expedited work |
Client cancellation | Unrecoverable committed costs |
A risk allowance is not a substitute for clear contract terms.
It is an internal pricing provision for foreseeable uncertainty.
Illustrative reserve
Cost element | Amount |
Direct project cost | €3,250 |
Internal change-risk allowance | €150 |
Planned cost basis | €3,400 |
The €150 is a hypothetical reserve.
It should be informed by historical project experience rather than applied blindly to every job.
A complex multi-stone design may require greater risk consideration than a standard solitaire.
Step 9: Understand the Difference Between Markup and Margin
This is one of the most important calculations in bespoke jewellery pricing.
Markup measures profit contribution as a percentage of cost.
Gross margin measures that contribution as a percentage of selling price.
They are not interchangeable.
Markup formula
Markup % = (Selling price − Cost) ÷ Cost × 100
Gross margin formula
Gross margin % = (Selling price − Cost) ÷ Selling price × 100
Example
Suppose the costing basis is €3,400 and the jeweller sells the ring for €5,000 excluding VAT.
The difference is €1,600.
Markup:
€1,600 ÷ €3,400 × 100 = 47.06%
Planned gross margin:
€1,600 ÷ €5,000 × 100 = 32%
These are different percentages describing the same quoted project.
Markup vs margin table
Cost | Selling price | Markup | Gross margin |
€1,000 | €1,250 | 25% | 20% |
€1,000 | €1,500 | 50% | 33.33% |
€1,000 | €2,000 | 100% | 50% |
A jeweller intending to achieve a 35% gross margin should not simply add 35% to the cost.
Doing so produces a lower margin.
Step 10: Calculate the Selling Price from the Target Margin
For a target margin, use:
Selling price excluding VAT = Planned cost basis ÷ (1 − Target margin)
The margin should be expressed as a decimal.
For example, 32% becomes 0.32.
Worked calculation
Planned cost basis: €3,400.
Target planned margin: 32%.
Selling price:
€3,400 ÷ (1 − 0.32)
= €3,400 ÷ 0.68
= €5,000
The €5,000 quotation leaves €1,600 above the planned cost basis.
That amount is a contribution towards overheads and profit. It is not necessarily net profit.
If the €150 risk allowance is unused, the actual contribution may be higher than planned.
If unexpected costs exceed the allowance, it may be lower.
Different margin targets
Target margin | Planned cost | Required selling price ex. VAT |
20% | €3,400 | €4,250.00 |
25% | €3,400 | €4,533.33 |
30% | €3,400 | €4,857.14 |
32% | €3,400 | €5,000.00 |
35% | €3,400 | €5,230.77 |
40% | €3,400 | €5,666.67 |
These examples demonstrate margin mathematics.
They are not recommendations that every jewellery business must use a particular percentage.
The appropriate margin depends on overheads, risk, customer acquisition costs, competition, service commitments and business objectives.
Step 11: Calculate VAT Separately
VAT is a tax treatment, not a profit margin.
For a standard domestic Belgian sale of a newly manufactured diamond ring, the standard Belgian VAT rate is generally 21%, subject to the applicable rules and any relevant exceptions.
However, transactions involving another EU country, exports, business customers or different contract structures may have different VAT treatments.
Belgian domestic example
Assume the finished ring is sold to a private customer in Belgium under the standard 21% VAT treatment.
Component | Amount |
Ring selling price excluding VAT | €5,000 |
VAT rate | 21% |
VAT amount | €1,050 |
Customer price including VAT | €6,050 |
Formula:
VAT = Taxable selling amount × Applicable VAT rate
Price including VAT = Taxable selling amount + VAT
VAT must be calculated on the correctly determined taxable amount.
For example, separately charged incidental shipping and insurance costs can be part of the taxable amount under EU VAT rules.
The jeweller should not automatically exclude them merely because they appear on separate invoice lines.
What about intra-EU B2B sales?
A qualifying cross-border B2B transaction may be treated differently from a domestic Belgian retail sale.
The seller should verify the business customer's VAT identification, movement of goods, invoicing requirements and conditions for the relevant treatment.
Do not automatically charge 21% Belgian VAT or automatically apply a zero rate to every international order.
What about exports outside the EU?
Export treatment depends on the actual goods movement and documentary requirements.
The jeweller should obtain appropriate tax and customs advice for the transaction.
Complete Worked Quote: From Diamond Offer to Finished Ring
The following example combines all the costing stages.
Project: Bespoke natural diamond solitaire engagement ring.
Centre: Natural round brilliant, one-carat class.
Metal: 18K yellow gold.
Customer: Private buyer in Belgium.
Tax assumption: Standard Belgian domestic VAT treatment.
All figures: Illustrative, not current Dalila diamond prices or workshop offers.
Internal costing
Item | Amount |
Natural loose diamond | €2,100 |
Diamond inbound delivery and insurance | €50 |
18K gold allocation | €350 |
Design and CAD | €100 |
Manufacturing | €200 |
Diamond setting | €250 |
Finishing | €100 |
Quality control | €50 |
Packaging and fulfilment | €50 |
Direct project cost | €3,250 |
Internal change-risk allowance | €150 |
Planned costing basis | €3,400 |
Planned contribution at selling price | €1,600 |
Selling price excluding VAT | €5,000 |
VAT at 21% | €1,050 |
Final customer quote | €6,050 |
What the jeweller should understand
The centre diamond represents €2,100 of the direct cost.
The other direct costs total €1,150.
The risk allowance adds another €150 to the planned costing basis.
The €1,600 planned contribution is not pure profit. It must also support the business's indirect costs.
The €1,050 VAT is not commercial revenue retained by the jeweller as margin.
This is why a transparent internal worksheet is essential.
Should the Customer See Every Internal Cost?
Not necessarily.
The jeweller may keep the detailed internal cost and margin worksheet private while presenting the customer with a clear commercial quotation.
The customer should understand what is being purchased and the agreed total price.
However, the business does not normally need to disclose confidential supplier prices, workshop costs or internal margin calculations unless contractually required.
Customer-facing quotation example
Bespoke Natural Diamond Engagement Ring
Description | Included |
Centre diamond | One identified natural round brilliant |
Diamond grading | Independent report, number to be stated |
Mounting | Custom 18K yellow-gold solitaire |
Design | Agreed CAD approval stage |
Stone setting | Professional centre-diamond setting |
Finishing | Final polishing and inspection |
Packaging | Approved presentation packaging |
Delivery | As specified in quotation |
Price excluding VAT | €5,000 |
Belgian VAT at 21% | €1,050 |
Total including VAT | €6,050 |
The final customer quote should also state the diamond reference, ring size, approved design, timeline, payment schedule, price validity and change policy.
A quotation is not complete merely because it contains a total price.
How Long Should a Bespoke Diamond Ring Quote Remain Valid?
The validity period should reflect the supplier's diamond reservation terms and the jeweller's ability to maintain the quoted costs.
For example, a loose diamond could be available at one price today but unavailable when the client approves the quotation several days later.
A jeweller should not offer an unconditional long-term fixed price unless the underlying cost and availability risks are controlled.
What to specify
Term | What the quotation should say |
Diamond availability | Subject to confirmation until reserved |
Stone price validity | Actual supplier deadline |
Finished ring quote validity | Jeweller's own confirmed deadline |
Deposit | Amount and conditions |
Reservation | When the identified stone is secured |
Design approval | Required before manufacturing |
Price changes | Conditions under which requoting may occur |
Cancellation | Terms for committed costs |
Delivery estimate | Starting event and limitations |
The business should use its own legally reviewed terms.
Do not invent a universal 24-hour or seven-day quotation validity policy.
How to Control Diamond Price Changes
Natural loose diamonds are individual inventory items.
A specific stone may be sold to another buyer.
Its supplier quotation may also expire.
This creates exposure for bespoke ring manufacturers.
Example
A jeweller quotes a completed ring based on a €2,100 centre diamond.
The customer does not approve the order immediately.
When the jeweller attempts to purchase the diamond, it is no longer available.
The closest acceptable alternative costs €2,350.
The difference is €250.
If the ring was sold at a fixed price without a reservation or appropriate variation terms, the jeweller may face an unplanned reduction in margin.
Risk-control process
Before customer approval: Clearly label the price as provisional where the stone is not reserved.
After customer approval: Confirm the actual supplier stock and reservation conditions.
Before manufacturing: Reconcile the selected diamond reference, report number and approved ring design.
If the stone changes: Issue a revised specification and quotation for approval.
A different stone should not be substituted silently, even where the carat weight, colour and clarity appear similar.
How to Quote Design Changes After Approval
Bespoke ring clients sometimes change their requirements.
For example, they may request:
A wider band.
A larger centre diamond.
Yellow gold instead of platinum.
A different setting height.
Additional pavé diamonds.
A hidden halo.
More CAD revisions.
An earlier delivery date.
These changes can affect both cost and schedule.
Change-control worksheet
Requested change | Cost impact | Deadline impact | Approval required |
Change centre diamond | Requote actual stone | Possible | Yes |
Increase band width | More metal/work | Possible | Yes |
Add hidden halo | Additional diamonds and labour | Likely | Yes |
Change metal | Recalculate material/manufacturing | Possible | Yes |
Change ring size | May alter metal or production | Depends on stage | Yes |
Additional CAD revision | Design cost | Possible | Yes |
Rush completion | Additional production/logistics | Likely | Yes |
A revised quotation should identify the differences from the approved version.
The jeweller should not rely on informal messages where the project scope or cost changes materially.
How to Quote a Ring with Pavé or Side Diamonds
A solitaire typically requires one centre diamond.
A ring with a pavé band, halo or side stones adds complexity.
Each group of diamonds needs its own specification and acquisition cost.
Additional small-diamond costs
Component | Required data |
Pavé diamonds | Quantity, size and total weight |
Side diamonds | Shape, dimensions and matching requirements |
Colour/clarity | Agreed quality range |
Origin | Natural or other agreed category |
Calibration | Manufacturer-approved tolerance |
Extra setting labour | Price for additional stones |
Additional metalwork | Beads, prongs, halo structure or other |
Spare stones | Cost and handling, if required |
QC | Inspection of every setting |
A quote describing “natural diamonds around the band” is too vague for accurate manufacturing costing.
The jeweller should know the stone count and construction method before fixing the price.
For visual matching between the centre and pavé, refer to /blogs/pave-diamond-colour-match-centre-stone.
Worked Comparison: Solitaire vs Pavé Ring
Consider two hypothetical rings using the same natural centre diamond.
Cost component | Solitaire | Pavé design |
Centre diamond | €2,100 | €2,100 |
Inbound transport | €50 | €50 |
Metal and fabrication | €550 | €680 |
Design/CAD | €100 | €180 |
Additional pavé diamonds | €0 | €420 |
Setting labour | €250 | €520 |
Finishing, QC and packaging | €200 | €230 |
Direct cost | €3,250 | €4,180 |
These figures are illustrative.
The pavé design has €930 more direct cost.
That additional expense is not simply a charge for the small diamonds.
It also includes more design, metalwork and setting labour.
The jeweller should then apply its selected risk and pricing method to the relevant cost basis.
Why the Same Diamond Can Produce Different Ring Quotes
Two jewellers may buy the same natural centre diamond but quote different finished-ring prices.
That is not automatically evidence that one quotation is incorrect.
The manufacturing specifications and business models may differ.
Reasons for variation
Factor | Why it changes the quote |
Setting construction | Different technical complexity |
Metal weight | Different material requirements |
CAD work | Standard adaptation vs bespoke design |
Workshop location | Labour and supplier costs differ |
Quality-control scope | Different inspection processes |
Packaging and delivery | Different service levels |
Warranty and aftercare | Different obligations |
Business overhead | Rent, staff, insurance and operating costs |
Marketing/acquisition | Different cost of acquiring the customer |
Profit target | Different commercial models |
The buyer should compare genuinely equivalent jewellery specifications.
A quote for a thin standard solitaire cannot be compared fairly with one for a heavier custom setting simply because both contain a one-carat diamond.
Should Jewellers Add a Separate Sourcing Fee?
A sourcing fee may be appropriate if it is part of the business's agreed pricing model.
However, the jeweller should avoid charging for the same procurement activity twice without recognising the duplication.
For example, a supplier may already include sourcing services in the quoted diamond price.
The jeweller may then add a separately disclosed consultation or procurement service fee.
Alternatively, the jeweller may include procurement effort in the overall ring price.
Both models can be commercially valid when communicated clearly.
Pricing alternatives
Model | Description |
Bundled quote | One finished-ring selling price |
Itemised quote | Diamond, mounting and specified service lines |
Design fee plus finished ring | Separate design stage and production quote |
Client-supplied diamond | Jeweller quotes setting and accepts separate liability terms |
Procurement fee | Expressly agreed sourcing service charge |
The choice depends on the business model and customer agreement.
Dalila's own loose-diamond sourcing charges should not be assumed to be a particular percentage unless an actual quotation states them.
What if the Client Supplies Their Own Diamond?
This changes the quotation.
The jeweller does not need to purchase the centre stone, but it must still inspect the diamond and establish the setting requirements.
The manufacturer should also clarify responsibility for customer-owned stones.
Client-supplied diamond quote
Item | Treatment |
Centre diamond purchase | Excluded |
Stone identification and inspection | As agreed |
Setting compatibility check | Required |
Metal and mounting | Quoted |
CAD | Quoted |
Manufacturing | Quoted |
Setting labour | Quoted |
Damage liability | Written terms |
Shipping and insurance | As agreed |
VAT | Correct treatment for transaction |
Do not price a client-supplied diamond project as though the jeweller is supplying the stone.
Likewise, removing the diamond cost does not remove the need to price setting risk and labour.
Bespoke Diamond Ring Costing Worksheet
The following worksheet is intended for professional jewellers and jewellery businesses.
A. Project information
Field | Value |
Project reference | ______ |
Customer reference | ______ |
Ring style | ______ |
Metal | ______ |
Ring size | ______ |
Centre shape | ______ |
Side stones required | ______ |
Design approved | Yes / No |
Target delivery date | ______ |
Quote date | ______ |
Quote expiry | ______ |
B. Centre diamond
Field | Value |
Diamond origin | Natural |
Supplier | ______ |
Stock number | ______ |
Grading laboratory | ______ |
Report number | ______ |
Shape | ______ |
Weight | ______ ct |
Measurements | ______ mm |
Colour | ______ |
Clarity | ______ |
Cut details | ______ |
Supplier quote currency | ______ |
Supplier quote amount | ______ |
Currency conversion basis | ______ |
Net diamond purchase cost | ______ |
Shipping and insurance | ______ |
Reservation status | ______ |
Supplier expiry | ______ |
Inspection terms | ______ |
C. Metal and manufacturing
Cost | Amount excluding recoverable VAT |
Precious metal | €______ |
Head or mounting components | €______ |
Design/CAD | €______ |
Casting/fabrication | €______ |
Assembly | €______ |
Centre setting | €______ |
Additional diamond setting | €______ |
Finishing | €______ |
Inspection | €______ |
Packaging | €______ |
Delivery | €______ |
Other direct costs | €______ |
Total direct cost | €______ |
D. Risk and profitability
Calculation | Value |
Direct project cost | €______ |
Risk allowance | €______ |
Planned cost basis | €______ |
Target contribution margin | ______% |
Selling price excluding VAT | €______ |
Planned contribution | €______ |
Markup on planned cost | ______% |
Expected fixed-overhead allocation, if used | €______ |
Expected net operating result | €______ |
E. VAT and customer price
Calculation | Value |
Selling price excluding VAT | €______ |
Applicable VAT treatment | ______ |
VAT rate, if charged | ______% |
VAT amount | €______ |
Total customer price | €______ |
Deposit required | €______ |
Balance due | €______ |
Payment milestones | ______ |
F. Change and approval control
Requirement | Status |
Stone available | ______ |
Stone reserved | ______ |
Report verified | ______ |
Manufacturer approved dimensions | ______ |
CAD approved | ______ |
Ring size confirmed | ______ |
Change allowance stated | ______ |
Customer approved total | ______ |
Deposit received | ______ |
Stone ordered | ______ |
Production authorised | ______ |
Delivery date confirmed | ______ |
Final inspection complete | ______ |
This worksheet provides a starting structure. Businesses should adapt it to their own costing software, accounting treatment and legal terms.
Essential Spreadsheet Formulas for a Bespoke Ring Quote
A jewellery business can automate the same calculation in a spreadsheet.
Cost
Direct cost = SUM(all project cost lines)
Planned cost = Direct cost + Risk allowance
Margin-based selling price
Net selling price = Planned cost ÷ (1 − Target margin)
Profit contribution
Planned contribution = Net selling price − Planned cost
Actual margin after completion
Actual margin = (Net selling price − Actual total project cost) ÷ Net selling price
VAT
VAT amount = Applicable taxable amount × VAT rate
Total including VAT = Taxable amount + VAT
Excel-style example
Assume:
B2 = Direct cost.
B3 = Risk allowance.
B4 = Target margin as a percentage.
B5 = VAT rate as a percentage.
Then:
B6 = B2+B3
B7 = B6/(1-B4)
B8 = B7-B6
B9 = B7*B5
B10 = B7+B9
For the example:
B2 = 3250.
B3 = 150.
B4 = 32%.
B5 = 21%.
The result is a €5,000 selling price excluding VAT and €6,050 including VAT.
These formulas assume a straightforward transaction where the specified VAT rate applies to the full selling price. More complex transactions require appropriate tax treatment.
How Dalila Diamonds Fits Into the Quotation Process
Dalila Diamonds supplies natural loose diamonds and publishes specification-led sourcing services.
Its DS4U — Diamond Source For You service is relevant when a jeweller needs a diamond that meets an approved shape, size, quality, budget and deadline.
Its S2S — Secure To Source service is designed for professional buyers who have already shortlisted a particular natural diamond online and need sourcing support, including coordination of quality-control review, euro payment and delivery.
The jeweller can use the confirmed Dalila quotation as the centre-stone input in the bespoke-ring costing sheet.
Division of responsibilities
Activity | Dalila Diamonds | Manufacturing jeweller |
Natural loose-diamond sourcing | Published service | Defines requirements |
Stone specifications and report review | According to service | Reviews for design |
Individual diamond quotation | Subject to availability | Uses as cost input |
Approved transport | According to transaction | Coordinates receipt |
Ring CAD | Not assumed | Yes |
Metal sourcing | Not assumed | Yes |
Casting/fabrication | Not assumed | Yes |
Stone setting | Not assumed | Yes |
Finished jewellery inspection | Not assumed | Yes |
Customer-facing ring quotation | Not assumed | Yes |
Finished-ring VAT accounting | Not assumed | Seller's responsibility |
Dalila should not be represented as automatically manufacturing or pricing completed bespoke rings unless that service is independently confirmed.
A natural diamond supplier's quotation is an input, not the jeweller's final customer offer.
RFQ Checklist Before Asking Dalila for a Diamond Price
A useful sourcing enquiry should provide enough information for the supplier to identify relevant stones.
Example
Project: Bespoke natural diamond engagement ring.
Centre shape: Round brilliant.
Origin: Natural.
Target weight: Approximately 1.00 ct.
Colour: G–H.
Clarity: VS1–VS2, with agreed alternatives.
Cut: Strong optical performance.
Grading: GIA, IGI or HRD as approved.
Actual measurements: Provide full dimensions for each shortlisted candidate.
Budget: Maximum approved loose-stone cost.
Delivery: Authorised receiving workshop.
Deadline: Date the diamond must arrive, not merely the finished-ring deadline.
Commercial requirements: Price validity, reservation, shipping, insurance and inspection terms.
The supplier should then respond with actual available stones and current quotations.
The jeweller can compare those offers and complete the finished-ring pricing process.
Frequently Asked Questions
How do you calculate the price of a bespoke diamond ring?
Add the confirmed loose-diamond acquisition cost, metal, design, manufacturing, setting, finishing, fulfilment and relevant risk allowance. Apply an appropriate margin and calculate VAT according to the transaction.
Is the loose diamond price the same as the finished ring price?
No. A loose diamond quotation normally excludes the mounting and manufacturing work unless expressly stated otherwise.
How much does it cost to turn a loose diamond into a ring?
The cost depends on metal, setting design, labour and other project requirements. An itemised workshop quotation is needed.
What should a diamond ring quote include?
The identified diamond, mounting specification, metal, ring size, included services, total price, VAT treatment, validity, payment terms, delivery and change conditions.
Should a jeweller charge separately for CAD?
That depends on the business model. CAD may be itemised or included in the finished jewellery price.
Is gold charged separately from labour?
For internal costing, they should be distinguishable. A customer-facing quote may bundle them if the scope is clear.
Should a diamond sourcing fee be included?
Only if applicable under the agreed pricing model. Avoid double-counting sourcing costs already included elsewhere.
What is the difference between markup and margin?
Markup measures contribution relative to cost. Margin measures contribution relative to selling price.
How do I calculate a 30% margin?
Divide the planned cost by 0.70 to obtain the required selling price excluding VAT.
Is adding 30% to the cost the same as a 30% margin?
No. A 30% markup corresponds to approximately 23.08% margin.
Should jewellers add VAT before calculating margin?
Normally, commercial margins are calculated on an appropriate net-of-VAT basis. The correct treatment of recoverable and non-recoverable VAT must be applied.
What is Belgium's standard VAT rate?
Belgium's standard VAT rate is 21%. Whether that rate applies to a specific diamond-ring transaction depends on the circumstances.
Do intra-EU B2B diamond ring sales always include Belgian VAT?
No. Qualifying cross-border transactions can have different VAT treatment, subject to the relevant requirements.
Is VAT profit for the jeweller?
No. VAT collected on taxable sales must be accounted for under the applicable tax system.
What if the diamond supplier increases the price?
Review the supplier's quotation validity and the jeweller's contract terms. If the cost changes before commitment, a revised client quotation may be necessary.
What if the selected diamond is sold before the customer pays?
The jeweller should confirm new availability, provide a suitable alternative for approval or revise the quote according to the agreed terms.
Should a ring quote have an expiry date?
Yes. It should state an appropriate validity period based on the jeweller's confirmed ability to maintain the proposed terms.
How should CAD revisions be charged?
Define the number of included revisions and the treatment of additional work in the quote.
Does adding a hidden halo increase manufacturing cost?
It can. A hidden halo may require additional diamonds, metalwork, setting labour and inspection.
Why does a pavé ring cost more than a solitaire?
Pavé generally introduces more stones, setting positions and associated manufacturing work.
Can the customer supply their own diamond?
Some jewellers accept externally sourced stones. Their inspection, liability and setting policies must be confirmed.
How do I calculate margin if the project has unexpected costs?
Use the actual completed project cost rather than the original estimate to calculate realised margin.
Is risk allowance the same as profit?
No. A risk allowance is included to account for foreseeable project uncertainty. Profit depends on actual revenue and cost.
Should I give the customer my supplier's diamond purchase price?
Not necessarily. The business can provide a transparent final quotation without disclosing confidential internal costs unless required by agreement.
Can Dalila provide a loose diamond quote for a bespoke engagement ring?
Dalila offers natural loose-diamond sourcing and specification-led enquiries. An actual quotation depends on the chosen stone, availability and transaction terms.
Does Dalila manufacture bespoke engagement rings?
Finished-ring manufacturing is not established as part of its publicly described loose-diamond sourcing services.
What should I request from Dalila before quoting my client?
Ask for the exact natural diamond reference, report, dimensions, confirmed price, validity, availability, delivery cost, insurance and inspection terms.
Can I use the same calculation for diamond pendants or earrings?
The costing framework can be adapted, but the manufacturing tasks, stone counts and setting costs differ by jewellery type.
Final Checklist: Quote the Complete Ring, Not Just the Diamond
A profitable bespoke diamond-ring quotation begins with accurate information.
The centre diamond should be identified, available and quoted under clear terms.
The manufacturing jeweller must then calculate the actual cost of making and setting the ring.
Metal, design, labour, finishing, inspection, fulfilment and foreseeable risk should all be included.
Markup and margin must be calculated correctly, and VAT should be applied according to the transaction rather than treated as ordinary profit.
Any later changes to the diamond, setting, metal, ring size or delivery requirements should be approved through a documented process.
The recommended sequence is: verify the loose-diamond offer → calculate landed stone cost → cost the metal and manufacturing → include direct fulfilment expenses → assess change risk → apply the target margin → calculate VAT → issue a time-limited customer quotation → secure approval before ordering and production.
This creates a repeatable trade pricing process that protects the jeweller's margin while giving the customer a clear quotation for the completed bespoke ring.


