How to Specify Diamond Pairs for a Client's Stud Order: A Wholesale RFQ Guide

A professional diamond stud earring order should specify one matched pair of natural diamonds, including the acceptable differences in diameter, face-up colour, brightness, cut appearance and documentation. Simply requesting two diamonds of the same carat weight and clarity grade is not enough.
For example, a jewellery retailer may receive a client order for natural diamond studs weighing approximately 1.00 carat total.
The retailer asks a supplier for two round brilliant diamonds weighing 0.50 carat each.
Both diamonds may meet that weight requirement, yet one measures 5.05 mm and the other 5.22 mm.
Their face-up sizes differ by 0.17 mm.
Depending on the intended setting and visual inspection, the difference may be noticeable.
A more suitable pair might contain one diamond weighing 0.48 carat and another weighing 0.51 carat, provided their actual diameters and appearances match closely enough.
This distinction is fundamental to professional diamond sourcing.
The buyer is purchasing one coordinated pair, not simply two individual diamonds.
The request for quotation (RFQ) must make that relationship explicit.
This guide explains how jewellers and jewellery manufacturers can prepare a repeatable natural diamond stud-pair specification, determine practical tolerances, compare actual candidates and decide whether a proposed pair should be accepted or rejected.
It also includes a full supplier RFQ, an accepted-versus-rejected evaluation example and a final handover checklist.
What Is a Diamond Stud Pair Sourcing Specification?
A diamond stud pair sourcing specification is a written procurement document describing the two loose diamonds needed for a matching pair of earrings.
It identifies what each diamond must satisfy individually and which characteristics must be consistent across the pair.
For a client order, the document should include:
Natural diamond origin.
Diamond shape and cutting style.
Quantity: one pair containing two stones.
Target carat weight per stone and total pair weight.
Actual face-up measurements and permitted differences.
Colour and clarity requirements.
Cut, brightness and transparency requirements.
Fluorescence preferences.
Grading-report requirements.
Intended earring setting.
Pair budget, availability and deadline.
Final acceptance and rejection criteria.
The RFQ should be detailed enough that the supplier can identify suitable stones without guessing what the client means by "matching."
Why Two Diamonds With Identical Grades May Not Match
Diamond grading reports provide important objective information.
However, identical headline grades do not guarantee identical appearance.
Consider two natural round brilliant diamonds.
Characteristic | Diamond A | Diamond B |
Weight | 0.50 ct | 0.50 ct |
Colour | G | G |
Clarity | VS2 | VS2 |
Cut | Excellent | Excellent |
Average diameter | 5.05 mm | 5.22 mm |
Fluorescence | None | None |
Although their main grades match, their average diameters differ by 0.17 mm.
The diamonds may also display different proportions, brightness and facet patterns.
For a matching earring pair, these differences require review.
What matters most?
The priorities depend on the client's expectations and the earring design.
For classic round brilliant studs, the most useful controls generally include:
Priority | Requirement |
Face-up size | Closely matched actual diameter |
Colour | Consistent visible appearance |
Cut | Compatible brightness and facet appearance |
Clarity | Similar visual cleanliness and transparency |
Shape | Same intended outline |
Fluorescence | No distracting difference under relevant conditions |
Depth | Suitable for matched settings |
Condition | No unacceptable chips or damage |
A pair can be well matched without having mathematically identical carat weights.
Step 1: Confirm Whether the Client's Weight Means Per Ear or Total Weight
This is the first requirement to clarify.
Customers often ask for "one-carat diamond studs," but that description can mean different things.
The order may be for:
1.00 carat total weight: Approximately 0.50 carat in each earring.
1.00 carat per ear: Approximately 2.00 carats total.
These are very different orders.
Stud-pair weight guide
Total carat weight | Approximate weight per diamond | Approximate round diameter |
0.30 ctw | 0.15 ct | 3.4–3.5 mm |
0.50 ctw | 0.25 ct | 4.0–4.1 mm |
0.75 ctw | 0.375 ct | Around 4.6–4.7 mm |
1.00 ctw | 0.50 ct | Around 5.1 mm |
1.50 ctw | 0.75 ct | Around 5.8 mm |
2.00 ctw | 1.00 ct | Around 6.5 mm |
3.00 ctw | 1.50 ct | Around 7.4 mm |
These are approximate references for round brilliant diamonds, not exact size-to-weight conversions.
An actual diamond's face-up dimensions depend on its proportions.
Correct RFQ wording
Instead of:
"Need one-carat G VS2 studs."
Write:
"One matched pair of natural round brilliant loose diamonds, approximately 1.00 carat total weight, targeting approximately 0.50 carat per diamond."
This removes a common source of quotation mistakes.
Step 2: Define Diameter Matching Before Carat Matching
For round diamond studs, diameter is one of the strongest practical matching criteria.
A pair with nearly identical face-up diameters can look more consistent than a pair with identical weights but visibly different spreads.
How diameter is measured
A round diamond grading report generally lists two face-up diameters and its total depth.
For example:
Diamond A: 5.08 × 5.12 × 3.16 mm.
Diamond B: 5.09 × 5.13 × 3.18 mm.
Average diameter is calculated using the two face-up measurements.
Average diameter = (minimum diameter + maximum diameter) ÷ 2
For Diamond A:
(5.08 + 5.12) ÷ 2 = 5.10 mm.
For Diamond B:
(5.09 + 5.13) ÷ 2 = 5.11 mm.
The average-diameter difference is 0.01 mm.
This is a useful initial indication of size matching.
However, the supplier should also examine roundness, table appearance and other proportions.
Example diameter tolerances
Pair requirement | Illustrative criterion |
Preferred average diameter difference | No more than 0.05 mm |
Wider acceptable range, if approved | No more than 0.10 mm |
Individual diameter range | Defined for the target size |
Out-of-roundness | Reviewed for each stone |
Setting compatibility | Confirmed by manufacturer |
These values are illustrative RFQ requirements, not universal industry standards.
A jeweller may choose a different tolerance based on the diamond size, customer expectations and actual setting design.
The key is to specify the tolerance in writing.
Step 3: Define Carat Weight as an Acceptable Range
Carat weight still matters.
It influences price, product descriptions and total diamond weight.
However, the RFQ should allow an appropriate range when minor weight differences produce better visual matching.
Example
For a pair intended to have approximately 1.00 carat total weight, a jeweller might request:
Target per diamond: Approximately 0.50 ct.
Acceptable individual range: 0.48–0.52 ct.
Target total weight: Approximately 1.00 ctw.
Priority: Closely matched actual face-up diameters.
If the completed pair weighs 0.99 ctw, the exact total should be recorded.
The finished earring description must use accurate weight information and comply with applicable disclosure and rounding requirements.
A pair should not automatically be described as "1.00 ctw" if that would misstate the actual stones under the applicable sales rules.
Why flexible weight ranges help
Natural diamonds are not manufactured to an identical weight.
A strict demand for exactly 0.50 ct each can unnecessarily eliminate visually superior combinations.
Professional sourcing should focus on the customer's desired appearance while respecting the agreed commercial weight requirements.
Step 4: Match Colour Consistently Across Both Diamonds
For natural diamond studs, the two diamonds should generally have a compatible face-up colour appearance.
They do not always require identical grading letters.
For example, a G-colour diamond may look suitable beside another G-colour diamond.
A carefully selected G–H pair may also appear compatible in the finished earrings.
However, the buyer should evaluate the actual stones.
Colour specification examples
Client requirement | Possible trade specification |
Very white appearance | D–F, visually matched |
Near-colourless appearance | G–H, visually matched |
Slightly warmer appearance | H–I or another approved range |
Exact reported colour | Both stones in specified grade |
Flexible colour | Approved range with mandatory visual consistency |
These are starting points, not guarantees.
Colour can appear differently in various lighting conditions and against different metals.
A client choosing yellow-gold stud mountings may accept a different colour relationship from a client seeking a very white platinum design.
Pair acceptance rule
The supplier should not rely only on the grade labels.
The two diamonds should be compared under the same conditions.
A noticeable warm-versus-white mismatch should trigger further review.
Step 5: Match Clarity Appearance, Not Only Clarity Grades
Clarity matching is more nuanced than requiring two identical grades.
For example, one VS2 diamond may contain inclusions that are difficult to notice.
Another VS2 diamond may have a different inclusion pattern.
Both may meet the laboratory definition of VS2, but they may not have identical visual characteristics.
For diamond studs, the jeweller should consider whether the inclusions are noticeable under the agreed viewing conditions.
Clarity specification
Preferred grade: VS2 or better.
Acceptable appearance: No unacceptable visible inclusions under the agreed inspection conditions.
Transparency: No unacceptable haze or cloudiness.
Condition: No unacceptable damage or durability concerns.
Where SI1 is permitted, the jeweller should define what constitutes an acceptable visually clean stone.
The term "eye-clean" should not be used without agreement on viewing distance, lighting, observer expectations and whether the assessment includes face-up inspection only.
Important distinction
A higher clarity grade does not guarantee stronger sparkle.
Cut quality and transparency must be considered separately.
Step 6: Match Cut Quality and Brightness
For round brilliant diamond studs, cut quality strongly influences visible sparkle.
Two diamonds may have similar dimensions and colour but still show different light performance.
One may appear lively and bright.
The other may have more persistent dark areas or weaker overall brilliance.
Round brilliant RFQ example
Property | Requirement |
Shape | Round brilliant |
Cut grade | GIA Excellent preferred |
Polish | Excellent or Very Good, as approved |
Symmetry | Excellent or Very Good, as approved |
Brightness | Visually compatible |
Scintillation | No distracting mismatch |
Transparency | Clear |
Table and depth | Reviewed for consistency |
Girdle | Suitable for setting |
Not every client order must require GIA Excellent.
However, if a particular grade is mandatory, the supplier should not substitute a lower grade without approval.
Pair comparison
The supplier should provide clear face-up images or video of both actual diamonds under comparable conditions.
The buyer should not compare one diamond filmed under strong studio lighting with another shown under different lighting and conclude they have equivalent brilliance.
Consistent inspection conditions matter.
Step 7: Control Fluorescence Differences
Fluorescence is another characteristic to address in the RFQ.
It is not automatically a defect.
Many fluorescent diamonds have acceptable appearance.
However, a pair with noticeably different fluorescence responses may be undesirable for a client requiring close matching.
Example specification
Preferred fluorescence: None to Faint.
Pair requirement: Compatible fluorescence appearance.
Alternative: Medium fluorescence may be considered only with explicit approval and appropriate appearance review.
The chosen limits should reflect the client's requirements.
A buyer should not automatically describe every fluorescent diamond as cloudy.
Cloudiness or transparency concerns must be assessed separately.
Step 8: Specify the Intended Stud Mounting
The diamonds are being sourced for a particular jewellery design.
The RFQ should therefore state the intended setting type.
Common stud designs include:
Setting | Manufacturing consideration |
Four-prong studs | Prong placement and matching face-up dimensions |
Three-prong martini-style studs | Head geometry, fit and balance |
Six-prong studs | Additional metal around the perimeter |
Bezel studs | Exact perimeter and girdle compatibility |
Basket studs | Depth and head profile |
Princess-cut studs | Corner protection |
Oval studs | Matching orientation and outline |
A diamond pair selected without considering the setting may require additional manufacturing adjustments.
The jeweller should approve the actual dimensions before purchasing a pair for a pre-existing head.
If the settings will be manufactured after diamond selection, the jeweller may have more flexibility.
Stud setting specification
Record:
Metal: 18K white gold, for example.
Head style: Four-prong basket.
Post and backing system: Approved by manufacturer.
Target face-up size: Approximately 5.1 mm per diamond.
Setting height: To be approved.
Diamond fit: Based on actual stone measurements.
A loose-diamond supplier should not be assumed to manufacture the finished earring mountings.
Step 9: Decide Which Laboratory Reports Are Required
Larger individually traded diamonds may have separate grading reports.
Smaller stones may be supplied without individual laboratory reports under an agreed quality specification.
The buyer should define the requirement before sourcing.
Report requirements
Field | Left diamond | Right diamond |
Origin | Natural | Natural |
Grading laboratory | GIA | GIA |
Report number | To be supplied | To be supplied |
Report verification | Required | Required |
Carat weight | Actual | Actual |
Measurements | Actual | Actual |
Colour | Actual | Actual |
Clarity | Actual | Actual |
Cut | Actual, where reported | Actual, where reported |
Fluorescence | Actual | Actual |
Laser inscription | Record if present | Record if present |
An individually graded pair should have both report numbers linked to the actual stones.
For smaller ungraded melee, request appropriate origin and quality documentation instead of advertising nonexistent individual reports.
A standard grading report also does not automatically establish the diamond's geographic mining origin.
Step 10: Specify Pair Approval and Rejection Criteria
This is where the RFQ becomes a useful procurement control.
A supplier should know exactly which differences are acceptable.
For example:
Mandatory: Both diamonds are natural round brilliants.
Mandatory: Both have GIA reports.
Mandatory: Colour G.
Mandatory: Clarity VS2 or better.
Mandatory: Cut Excellent.
Mandatory: Average diameter difference no more than 0.05 mm.
Preferred: Individual weight between 0.48 and 0.52 ct.
Preferred: None to Faint fluorescence.
Visual acceptance: Brightness, transparency and face-up appearance must be compatible.
Manufacturing acceptance: Both fit the approved stud setting design.
If the supplier proposes a pair outside a mandatory requirement, it should be presented as an exception requiring written approval.
Do not silently relax the specification.
Accepted vs Rejected Pair: Worked Trade Example
The following compares two hypothetical offers for a natural round brilliant stud order.
The customer wants approximately 1.00 carat total weight, G colour, VS2 or better clarity and closely matched face-up diameters.
Important: All candidate measurements below are hypothetical RFQ-testing data, not verified live inventory or actual Dalila stock.
Approved specification
Requirement | Acceptance criterion |
Quantity | One matched pair, two diamonds |
Origin | Natural |
Shape | Round brilliant |
Total carat target | Approximately 1.00 ctw |
Individual weight | 0.48–0.52 ct preferred |
Colour | G |
Clarity | VS2 or better |
Cut | GIA Excellent |
Maximum mean diameter difference | 0.05 mm |
Fluorescence | None–Faint |
Face-up appearance | Visually consistent |
Reports | Individual GIA reports |
Setting | Approved four-prong studs |
Offer A: Accepted on documented numerical criteria
Specification | Left diamond | Right diamond |
Weight | 0.49 ct | 0.51 ct |
Minimum diameter | 5.08 mm | 5.09 mm |
Maximum diameter | 5.12 mm | 5.13 mm |
Average diameter | 5.10 mm | 5.11 mm |
Total depth | 3.16 mm | 3.18 mm |
Colour | G | G |
Clarity | VS2 | VS2 |
Cut | Excellent | Excellent |
Fluorescence | None | Faint |
Natural origin | Yes | Yes |
Report | Required | Required |
Pair total: 1.00 ctw.
Average diameter difference: 0.01 mm.
Result: Passes the stated numerical and grade criteria.
The pair can proceed to actual visual and setting review.
It should receive final acceptance only after the physical stones, reports and appearance have been checked.
Why Offer A is a promising pair
The two diamonds have closely matched face-up sizes.
Both satisfy the colour, clarity and cut requirements.
The weight difference is small and does not prevent the pair from reaching the desired 1.00 ctw.
Their fluorescence falls within the allowed specification.
However, actual brightness, transparency, condition and setting fit remain subject to inspection.
Offer B: Rejected on diameter mismatch
Specification | Left diamond | Right diamond |
Weight | 0.50 ct | 0.50 ct |
Minimum diameter | 5.03 mm | 5.19 mm |
Maximum diameter | 5.07 mm | 5.23 mm |
Average diameter | 5.05 mm | 5.21 mm |
Total depth | 3.20 mm | 3.10 mm |
Colour | G | G |
Clarity | VS2 | VS2 |
Cut | Excellent | Excellent |
Fluorescence | None | None |
Natural origin | Yes | Yes |
Report | Required | Required |
Pair total: 1.00 ctw.
Average diameter difference: 0.16 mm.
Result: Rejected under the stated maximum 0.05 mm difference.
Why Offer B fails
Both stones weigh exactly 0.50 carat.
Both have the requested colour, clarity and cut grades.
But the face-up diameter difference is significantly outside the approved tolerance.
The pair therefore fails the stated dimensional acceptance criterion.
The buyer should not accept it simply because the total carat weight and grading letters match.
Decision summary
Requirement | Offer A | Offer B |
Natural round pair | Pass | Pass |
1.00 ctw target | Pass | Pass |
Colour G | Pass | Pass |
Clarity VS2+ | Pass | Pass |
Cut Excellent | Pass | Pass |
Diameter difference within 0.05 mm | Pass | Fail |
Final visual inspection | Pending | Not required for rejection decision |
Commercial decision | Provisionally acceptable | Reject |
Key lesson: A pair with slightly different carat weights may be more appropriate than a pair with identical weights but noticeably different face-up dimensions.
Step 11: What if One Stone Passes and the Other Fails?
A matched stud pair should be treated as one sourcing unit.
If one stone fails the agreed acceptance specification, the buyer should determine whether the complete pair must be replaced.
For example, one diamond may have suitable diameter, colour and optical appearance.
The other may have unacceptable haze.
The first diamond is not automatically useless, but it does not complete the ordered pair.
The supplier may be able to find a different compatible counterpart.
However, the buyer should not assume that a partial replacement or unrestricted return is allowed.
These terms should be confirmed in advance.
Pair nonconformity questions
Question | What to establish |
Can one stone be replaced? | Supplier policy |
Does the pair price change? | Written quote |
Can the entire pair be rejected? | Agreed return conditions |
Who pays extra shipping? | Commercial terms |
Must the pair stay unset? | Inspection rules |
When must defects be reported? | Notification deadline |
Is visual mismatch an agreed rejection ground? | Acceptance specification |
How are both stones identified? | Stock and report numbers |
Clear purchase criteria are essential because disagreement over visual matching can otherwise become subjective.
Step 12: Prepare a Repeatable Supplier RFQ
A professional sourcing brief should be reusable across client orders.
The following example is designed for a jeweller purchasing natural loose diamonds from a wholesale supplier.
Copy-ready RFQ: Natural round brilliant stud pair
RFQ reference: STUD-PAIR-001.
End use: Bespoke natural diamond stud earrings.
Quantity: One matched pair comprising two loose natural diamonds.
Shape: Round brilliant.
Total carat weight target: Approximately 1.00 ctw.
Individual weight: 0.48–0.52 ct preferred.
Colour: G mandatory.
Clarity: VS2 or better.
Cut: GIA Excellent mandatory.
Polish: Excellent or Very Good.
Symmetry: Excellent or Very Good.
Target diameter: Approximately 5.10 mm per stone.
Maximum pair average-diameter difference: 0.05 mm.
Maximum acceptable diameter range for each stone: To be approved by manufacturing jeweller.
Fluorescence: None–Faint.
Visual requirements: Consistent brightness, facet appearance, face-up colour and transparency.
Origin: Natural.
Grading reports: Separate GIA reports for both diamonds.
Videos/images: Comparable face-up footage of both actual diamonds.
Setting: Four-prong 18K white-gold stud earrings, manufactured separately.
Budget: €[approved maximum pair price].
Delivery: [authorised workshop address].
Required delivery date: [date].
Commercial terms: Confirm actual stock, quotation validity, reservation, shipment insurance, VAT treatment and inspection conditions.
Final approval: Written approval required for the complete pair before purchase.
This template should be completed with the client's budget, delivery date and manufacturer-approved physical size range before sending.
Full Diamond Stud Pair RFQ Worksheet
A. Client order information
Field | Value |
Internal project number | ______ |
Jewellery type | Stud earrings |
Client reference | ______ |
Metal | ______ |
Mounting type | ______ |
Earring head specification | ______ |
Expected finished size | ______ |
Finished jewellery deadline | ______ |
Required loose-diamond receipt date | ______ |
B. Diamond requirements
Field | Requirement |
Origin | Natural |
Quantity | One matched pair |
Number of stones | Two |
Shape | ______ |
Carat per diamond | ______ |
Total carat weight | ______ |
Individual weight tolerance | ______ |
Target diameter | ______ mm |
Permitted average diameter difference | ______ mm |
Permitted length difference, if applicable | ______ mm |
Permitted width difference, if applicable | ______ mm |
Permitted ratio difference, if applicable | ______ |
Depth requirement | ______ |
Colour | ______ |
Clarity | ______ |
Cut | ______ |
Polish | ______ |
Symmetry | ______ |
Fluorescence | ______ |
Transparency | ______ |
Required laboratory | ______ |
Visual inspection required | Yes / No |
C. Supplier's proposed pair
Field | Left diamond | Right diamond |
Stock reference | ______ | ______ |
Report number | ______ | ______ |
Carat weight | ______ | ______ |
Minimum diameter | ______ | ______ |
Maximum diameter | ______ | ______ |
Average diameter | ______ | ______ |
Total depth | ______ | ______ |
Colour | ______ | ______ |
Clarity | ______ | ______ |
Cut | ______ | ______ |
Polish | ______ | ______ |
Symmetry | ______ | ______ |
Fluorescence | ______ | ______ |
Natural origin | ______ | ______ |
Inscription | ______ | ______ |
Face-up inspection | ______ | ______ |
D. Calculated pair differences
Measurement | Result | Approved maximum |
Carat-weight difference | ______ ct | ______ |
Average-diameter difference | ______ mm | ______ mm |
Depth difference | ______ mm | ______ mm |
Colour difference | ______ | ______ |
Clarity difference | ______ | ______ |
Length/width difference for fancy shapes | ______ | ______ |
Visual brightness difference | ______ | Agreed standard |
Fluorescence difference | ______ | Agreed standard |
E. Commercial terms
Field | Value |
Supplier | ______ |
Pair quotation | ______ |
Currency | ______ |
Individual stone prices, if relevant | ______ |
VAT treatment | ______ |
Inbound shipping | ______ |
Insurance | ______ |
Supplier stock confirmation | ______ |
Pair reservation status | ______ |
Quotation expiry | ______ |
Inspection period | ______ |
Pair rejection terms | ______ |
Return authorisation procedure | ______ |
Delivery destination | ______ |
Delivery deadline | ______ |
F. Final approval
Check | Status |
Both stones confirmed natural | ______ |
Both reports verified | ______ |
Carat specification met | ______ |
Diameter tolerance met | ______ |
Colour requirement met | ______ |
Clarity requirement met | ______ |
Cut requirement met | ______ |
Transparency acceptable | ______ |
Fluorescence acceptable | ______ |
Pair visually reviewed together | ______ |
Both stones approved for setting | ______ |
Client-approved specification satisfied | ______ |
Complete pair accepted | ______ |
Purchase authorised | ______ |
This worksheet should be attached to the final purchase record.
The buyer should preserve the actual report numbers, stock references and approved images where available.
Specifying Fancy-Shaped Diamond Stud Pairs
The same process applies to oval, emerald, princess, pear and other shapes, but additional controls are necessary.
For example, oval studs may have the same carat weight and length-to-width ratio yet still look different because of outline and shoulder shape.
Pear-shaped studs may require mirrored orientation or intentionally consistent point direction.
Shape-specific requirements
Shape | Additional matching requirement |
Round | Average diameter and brightness |
Oval | Length, width, ratio, shoulder outline and bow tie |
Emerald | Length, width, clipped corners and step-facet appearance |
Princess | Square outline, corner profile and brilliance |
Cushion | Outline, ratio and facet style |
Pear | Shoulder balance, point shape and intended orientation |
Marquise | Tip alignment, symmetry and bow tie |
Radiant | Corner profile, facet style and ratio |
For fancy shapes, the buyer should request images of both stones in their intended left/right orientation.
Identical ratios do not guarantee identical outlines.
Example: Oval stud pair specification
Shape: Natural oval brilliant.
Weight: Approximately 0.75 ct per diamond.
Target total: Approximately 1.50 ctw.
L/W ratio: 1.38–1.45.
Length difference: Manufacturer-approved limit.
Width difference: Manufacturer-approved limit.
Colour: G–H, visually matched.
Clarity: VS2 or better, subject to appearance.
Bow tie: No distracting persistent asymmetry between the pair.
Outline: Similar shoulders and ends.
Reports: Two identified grading reports, if required.
Approval: Side-by-side face-up comparison mandatory.
The final size tolerance should be chosen for the actual earring setting.
How to Handle a Client's Existing Stud Setting
When the client already owns empty or prepared earring mountings, the sourcing specification must follow the settings' physical requirements.
For example, the customer may have two existing four-prong heads originally made for 5.1 mm round diamonds.
The jeweller should measure both settings.
Do not assume the heads are perfectly identical or undamaged.
Existing mounting worksheet
Component | Left head | Right head |
Metal | ______ | ______ |
Setting type | ______ | ______ |
Intended stone diameter | ______ mm | ______ mm |
Seat condition | ______ | ______ |
Prong condition | ______ | ______ |
Pavilion clearance | ______ | ______ |
Maximum acceptable depth | ______ | ______ |
Repair required | ______ | ______ |
Setter-approved tolerance | ______ | ______ |
A good-looking matched pair can still fail if the stones do not fit the existing mountings.
The setter should approve compatibility before final purchase.
How to Review Supplier Videos
Supplier videos can help the buyer assess appearance.
However, they should be reviewed under comparable conditions.
Video acceptance checklist
Feature | What to look for |
Both stones identifiable | References clearly linked |
Lighting | Comparable |
Camera exposure | Similar |
Magnification | Comparable |
Face-up view | Both included |
Movement | Similar angle and speed |
Brightness | No obvious mismatch |
Dark areas | No distracting imbalance |
Transparency | No hazy outlier |
Outline | Consistent |
Surface condition | No obvious unacceptable damage |
A video alone cannot confirm the complete grading or identity of a diamond.
The supplier should provide the grading documents and actual measured specifications.
Visual approval and documentary verification should support each other.
What Should Happen After the Pair Is Approved?
Once the buyer approves the complete pair, the commercial process should be documented.
The purchase order should identify both individual stones.
The quotation should state the agreed combined price, currency, delivery and inspection conditions.
Final purchase handoff
Document | Required connection |
Customer order | Internal project reference |
Supplier quotation | Both stock references |
Purchase order | One pair, two stones |
Grading reports | Linked to each stone |
Approved visuals | Linked to pair reference |
Commercial invoice | Correct quantities and description |
Shipping documents | Agreed delivery |
Receiving inspection | Pair conformity |
Manufacturing work order | Correct earring-head assignment |
Finished jewellery record | Accurate total weight and identification |
If the supplier substitutes one stone after approval, the buyer should receive revised documentation and approve the new pair.
A substitute must not be treated as approved automatically.
How Dalila Diamonds Fits Into Stud-Pair Sourcing
Dalila Diamonds publishes wholesale natural-diamond sourcing services that include matched pairs and specification-led enquiries.
Its wholesale sourcing guidance accepts requests for one matched pair or multiple pairs, with requirements such as carat weight, colour, clarity, measurements, cut, fluorescence, budget, delivery destination and deadline.
Its published matched-pair guide also explains why diameter and face-up appearance may be more important than identical individual weights for diamond studs.
What to send Dalila
Provide a complete two-stone specification and state that the diamonds are for stud earrings.
For example:
Required: One matched pair of natural round brilliants.
Target: Approximately 1.00 ctw.
Colour: G.
Clarity: VS2 or better.
Cut: Excellent.
Diameter difference: Maximum 0.05 mm.
Fluorescence: None–Faint.
Reports: Individual GIA reports.
Budget: Approved wholesale pair amount.
Deadline: Required workshop receipt date.
Approval: Both stones to be assessed together before purchase.
Dalila can assess the sourcing enquiry against its inventory and available supply, subject to commercial terms.
What should not be assumed
Dalila's published natural loose-diamond sourcing services do not automatically establish that it:
Manufactures the finished stud earrings.
Supplies a specific earring-back system.
Guarantees a matched pair in every requested grade.
Holds identified stones without an agreed reservation.
Provides individual grading reports for every small stone.
Accepts a pair return outside the written inspection terms.
Guarantees a fixed delivery date without confirmation.
The manufacturing jeweller remains responsible for the earring setting and completed jewellery inspection.
Common Mistakes When Ordering Wholesale Stud Pairs
Requesting “two half-carat diamonds” instead of one matched pair
The supplier may return two individually suitable diamonds that do not match visually.
Failing to clarify total carat weight
A one-carat total order is different from one carat per ear.
Matching exact carat weight but ignoring diameter
Equal weight does not guarantee equal visual size.
Assuming identical colour grades guarantee identical appearance
The actual stones should be compared.
Ignoring transparency
A hazy stone may look mismatched beside a clearer one.
Ignoring cut appearance
Two Excellent-cut diamonds may still differ somewhat in facet appearance and proportions.
Setting unrealistic tolerances
Extremely tight or unmeasurable differences can unnecessarily restrict supply.
Ignoring the earring-head specification
The stones may be attractive but physically unsuitable for the mounts.
Accepting a pair without verifying both reports
Each individually graded stone needs its own identity record.
Failing to define whole-pair rejection rights
If only one diamond fails, the buyer may face an incomplete client order.
Frequently Asked Questions
What is a diamond stud pair sourcing specification?
It is a written RFQ describing the two diamonds required for one stud earring pair, including individual quality criteria and matching tolerances.
Do two stud diamonds need identical carat weights?
No. Closely matched dimensions and visual appearance may matter more than identical weights.
What is a good diameter tolerance for round diamond studs?
The buyer may specify 0.05 mm or another appropriate limit, depending on the stone size and manufacturing design. There is no universal mandatory tolerance.
Can 0.49 ct and 0.51 ct diamonds make a matched pair?
Yes, potentially. Their measurements, colour, clarity appearance, cut and brightness should be compared.
Is 1.00 ctw the same as one carat per earring?
No. One carat total weight generally refers to the combined weight of both diamonds.
How do I calculate average diamond diameter?
Add the minimum and maximum face-up diameters and divide by two.
Is diameter more important than carat weight for stud matching?
Diameter is particularly important for visible size consistency, while carat weight remains relevant to pricing and product descriptions.
Should diamond studs have the same colour grade?
Identical grades can be useful, but visual compatibility is the main goal unless exact matching is a contractual requirement.
Can G and H diamonds make a good stud pair?
Potentially, if their face-up colour appearance is compatible and the client permits that range.
Should clarity be identical?
Not always. The key is to meet the agreed grade and visual cleanliness requirements.
Is VS2 good enough for diamond studs?
VS2 can be an appropriate specification, depending on the client's expectations and actual stones.
Can SI1 diamonds be used for studs?
Yes, if the buyer permits them and the stones meet the agreed clarity, transparency and durability requirements.
Should diamond studs have Excellent cut?
Excellent-cut round brilliants can be a strong choice, but the required cut standard depends on the client's brief and budget.
Does fluorescence have to match?
Not always exactly, but any relevant fluorescence difference should be compatible with the agreed appearance standard.
Do all diamond stud pairs have individual reports?
No. Documentation depends on stone size and the transaction. The RFQ should specify individual reports where required.
Can fancy-shaped stud diamonds be matched by ratio alone?
No. Actual outlines, lengths, widths and facet appearance must also be compared.
How do I match two oval diamonds for earrings?
Review their length, width, ratio, shoulder outline, bow-tie appearance, colour and brightness.
Do pear-shaped studs need mirrored diamonds?
That depends on the intended orientation. The jeweller should specify whether mirrored shapes are required.
What if the pair matches on paper but looks different?
Request a visual review and assess it against the agreed appearance criteria before approving the purchase.
Can I reject a pair if one diamond is cloudy?
If transparency or visual matching was part of the agreed specification and the pair fails it, the buyer should follow the documented nonconformity procedure and supplier terms.
What if one diamond becomes unavailable?
The supplier may propose a replacement candidate, but the complete revised pair must be approved.
Should the RFQ include setting dimensions?
Yes, particularly when the earrings use existing or premanufactured heads.
Does Dalila supply matched natural diamond pairs?
Dalila publicly accepts matched-pair wholesale sourcing enquiries, subject to availability and agreed commercial conditions.
Does Dalila make finished diamond stud earrings?
Its published wholesale sourcing information supports loose natural diamonds; finished jewellery manufacturing should not be assumed.
What should I send Dalila for a client stud order?
Provide one matched-pair quantity, origin, shape, total and individual weight targets, size tolerances, colour, clarity, cut, fluorescence, documentation, budget, mounting information and deadline.
Final Checklist: Buy One Matched Pair, Not Two Unrelated Stones
A successful stud earring sourcing order starts with an exact definition of the client's desired result.
The buyer must establish whether the carat weight refers to each ear or the pair total.
Next, the RFQ should define the acceptable face-up dimensions, colour, clarity, cut and visual appearance.
The supplier should then propose two identifiable stones as a coordinated pair.
The buyer should compare their actual measurements and reports, inspect them visually under consistent conditions and confirm that both fit the intended settings.
The recommended sequence is: confirm the client order → define total and per-stone weight → set dimensional and quality tolerances → request one matched natural diamond pair → compare actual stones → apply acceptance/rejection criteria → confirm commercial terms → approve the pair for setting.
This makes stud-pair purchasing more repeatable, reduces avoidable mismatches and gives the jeweller a clear record of what was ordered and approved.


