Articles Background

ARTICLES

Home›Articles

Choose a Loose Natural Diamond for a Custom Piece of Jewellery

Loose Diamonds for Custom Jewellery

Choose a Loose Natural Diamond for a Custom Piece of Jewellery

Quick answer: Start with the jewellery design, then choose the diamond. A ring centre stone, a matched pair for stud earrings, a pendant diamond and a group of stones for a multi-stone piece have different requirements. Record the number of stones, preferred shape, carat range, actual millimetre measurements, visual preferences, budget and setting information. For earrings or symmetrical designs, explain how closely the stones must match. Ask the jeweller making the piece to confirm mounting dimensions before approving a stone.

A loose diamond gives you the opportunity to compare the stone before it becomes part of a finished piece. That freedom is useful, but it changes the buying question. Instead of asking only, “Is this a good diamond?”, ask, “Is this the right diamond for the jewellery I want to make?”

An oval diamond may be beautiful but too wide for a mounting that has already been made. Two round diamonds may share a carat weight yet look unbalanced as earrings. A pendant stone may look different from the reference image you showed your designer. The way to avoid these problems is to connect the diamond shortlist to the intended design before committing to a purchase.

Dalila Diamonds’  accepts requests for individual natural diamonds, matched pairs and stones for bespoke jewellery designs. This guide helps you prepare the design brief; the jeweller or setter making the finishDS4U custom sourcing serviceed piece should confirm the mounting and stone fit. DS4U by Dalila

One diamond brief does not fit every piece

Jewellery project

Stones to source

Most important design information

What to compare

Solitaire ring

One centre diamond

Shape, desired face-up size and whether the setting already exists

Exact length, width and depth; outline; appearance; mounting fit

Stud earrings

Two visually matched diamonds

Desired size per ear and total weight for the pair

Face-up dimensions, colour appearance, brightness and a side-by-side view

Solitaire pendant

One diamond

Shape, orientation, mounting style and desired visible size

Face-up dimensions, outline and how the mounting will frame the stone

Multi-stone piece

A centre and side stones, or another specified group

Stone count, layout, graduation and positions that must match

Individual measurements, pair symmetry, colour relationship and overall balance

Carat measures weight. Millimetres describe the dimensions needed to assess fit and face-up size. Dalila’s diamond size chart offers approximate references, but the individual stone’s measurements are what you should compare with the jewellery design. For several diamonds, total carat weight does not tell you the size of each stone. Dalila

Choosing a centre diamond for a ring

Begin with the shape and the appearance you want on the hand. Then establish whether you have a finished mounting, an approved design or only a general idea. If the jeweller can make the setting around the chosen stone, you can compare several diamonds within a preferred size range. If the mounting already exists, its measured seat may restrict the acceptable length, width, depth and outline.

A photograph of another ring is a useful visual reference, but it is not a precise stone specification. Two diamonds of equal carat weight can have different visible dimensions. For a round brilliant, compare diameter as well as weight. For an oval, emerald or other fancy shape, compare length and width, inspect the outline, and review suitable photographs or video of the actual diamond.

Tell the supplier what matters most. You may care strongly about a particular outline or minimum face-up size while being flexible on a grade range. Stating those priorities allows the shortlist to contain meaningful alternatives instead of stones that merely share the same headline specifications.

Choosing two diamonds for stud earrings

Earrings are a pair, so selecting each diamond separately by its grading report can produce a disappointing result. Ask to see the proposed stones together. Compare their visible dimensions, outlines, face-up colour and brightness. Fancy shapes also need balanced proportions and orientation.

Be precise about weight. One carat total weight describes the combined weight of both stones if the quote refers to the pair; it does not mean one carat in each ear. Ask for the weight and millimetre measurements of each diamond. Then judge how the pair looks together. GIA likewise treats stud earrings as a distinct buying decision involving two stones. 4cs.gia.edu

Dalila’s existing matched-pair guide covers professional matching tolerances. For your own earring project, send the desired size per ear, design reference and budget, then request a side-by-side image or video of any proposed pair.

Choosing a diamond for a pendant

A pendant usually focuses attention on one stone, but its orientation and mounting affect the finished appearance. Decide whether you want a discreet point of light, a larger centre or a particular outline. Compare the stone’s face-up dimensions with the scale of the pendant you have in mind.

Discuss orientation before selecting a fancy shape. A pear-shaped diamond, for example, may be designed to hang point-up or point-down. An elongated stone may sit vertically or horizontally. Those choices affect the mounting and how much of the outline remains visible. If a mounting already exists, have the maker confirm that the specific diamond fits it.

Include a reference image and the approximate visible size you want in your request. A photograph alone cannot establish the reference pendant’s exact carat weight or measurements.

Choosing diamonds for a multi-stone design

Multi-stone jewellery needs a layout before it needs a list of grades. In a three-stone ring, the side diamonds must match one another and work with the centre. Record the intended outline and face-up dimensions for each position. Side stones can match each other perfectly yet look too large or too narrow beside the centre.

For an eternity band, bracelet or graduated design, state the number of stones, whether their sizes should be uniform or graduated, and what variation the maker can accept. Do not assume every small stone will have an individual grading report. Agree on the documentation and checks appropriate to the stones being sourced.

Send a labelled drawing with positions such as “centre,” “left” and “right,” or number each stone. If settings already exist, obtain measurements for each position. That is more useful than providing only a total-carat target.

Four-way loose-diamond specification worksheet

Use the relevant column when preparing an enquiry. Replace the general descriptions with your preferred sizes, budget and design details.

Field to complete

Ring centre

Stud pair

Pendant

Multi-stone piece

Design

Ring style and centre position

Stud style; left and right

Orientation and mounting

Label every stone position

Stone count

One centre, with accents specified separately

Two

One centre, with accents specified separately

Exact count by position

Shape

Preferred shape and outline

Visually balanced outlines

Shape and orientation

Centre and side shapes; mirrored sides if needed

Size

Carat range and important millimetre limits

Weight per stone and pair; dimensions of both

Desired face-up dimensions and carat range

Dimensions for every position; total weight as secondary information

Matching

Define accent matching separately

Visible size, colour and brightness

Note existing jewellery to coordinate with

Identify positions that must match

Existing mounting

Maker’s seat dimensions or drawing

Both setting dimensions

Pendant mounting dimensions

Measured seat for each position

Evidence

Appropriate report and actual images or video

Documentation suitable for stone size; side-by-side view

Appropriate report and face-up view

Suitable documentation and a grouped layout image

Commercial details

Diamond-only budget, country and required date

Budget for both stones, country and date

Diamond-only budget, country and date

Budget for the full group, quantity, country and date

If you do not know which colour or clarity range to request, say so. Your intended design, appearance preferences and budget can provide a more useful starting point than choosing grade letters without comparing stones.

Example sourcing request

I am choosing a loose natural diamond for an oval solitaire ring. The setting has not been made, and my jeweller can build it around the selected stone. I prefer a gently elongated outline. Please send available options within my diamond-only budget, with exact measurements, grading-report details and face-up images or video. Appearance and outline are priorities; I can consider a wider colour or clarity range for the right stone. I will include my delivery country and required date in the request.

Add your own preferred size range, budget, country and date to make the request actionable. If the mounting already exists, include the jeweller’s measured requirements.

Check the shortlist before approving a stone

Compare the actual diamonds offered for your project. Read their grading documentation, verify a report through the issuing laboratory where applicable, and compare the stated measurements with the design. Review images or video for outline, brightness and visible features that a headline grade may not settle. For a pair or group, ask to see the proposed stones together.

A standard round brilliant’s overall cut grade can help narrow options. Do not apply the same shortcut to every fancy shape. Dalila’s grading report guide explains report details; its quality chart covers the 4Cs. This page’s question remains whether the stones work in the intended jewellery. Dalila Diamonds

Before paying, confirm what the written quotation includes. A loose-diamond quote is not automatically a finished-jewellery quote. Establish who will make the mounting, inspect the diamond at handover, and handle delivery and any applicable return terms.

Send your design-led request to Dalila

For a ring, earrings, pendant or multi-stone project, use the worksheet to describe the loose natural diamonds you need. Include a drawing or reference image, setting measurements if a mounting exists, preferred shape and size, quantity, diamond-only budget, destination and date. Dalila can then respond with available options and their actual documentation and quotation terms.

Request Natural Diamond Options

Frequently asked questions

Can I choose the diamond before the jewellery design is finished?

Yes, if the designer can make the setting around the selected stone. If the mounting already exists, obtain its measured seat dimensions and the jeweller’s approval before buying.

Is the same grade combination best for a ring, studs and a pendant?

No single combination is best for all three. A ring centre is viewed closely, studs need visual balance as a pair, and a pendant’s dimensions and outline need to suit its orientation and mounting. Compare actual stones for the intended use.

Does a one-carat pair of studs mean one carat in each ear?

No, if the quote specifies one carat total weight, that is the combined weight of both diamonds. Ask for the weight and measurements of each individual stone.

Does every small diamond need its own grading report?

No blanket answer applies to every stone size and design. Ask what documentation and quality checks accompany the particular diamonds being offered.

Can Dalila help if inventory does not contain the stones I need?

Dalila’s DS4U service accepts precise natural-diamond requests, including individual stones and matched pairs. A request does not guarantee an exact match; Dalila can confirm available options and terms in its response.


Featured Diamonds

Loading diamonds...